2900Watt 110V-240V to 50V Power Supply Board /Repair parts​

  • Model: PSB2900
  • Shipping Weight: 3500g
  • 5 Units in Stock

 Ask a Question 

$220.00

Add to Cart:

2900Watt 110V-240V to 50V Power Supply Board

Applicable models: FMT,FMT2,FMT3,FMT5, series 350Watt, 600Watt, 1000Watt FM transmitter.
Please note the screw installation position to match your original position.

176Vac, the module maximum output power of 100% of the rated power is 2900W;
120Vac, the module maximum power output of 50% of rated power is 1450W;
85Vac, the module maximum power output of 18.75% rated power is 544W.
 
Below 45℃ ambient temperature, the module can output full power 2900W;
55℃ambient temperature, module maximum output power of 2320W;
60℃ ambient temperature, module maximum output power of 1450W;
65℃ ambient temperature, the maximum output power of the module is zero.
 
 
 
1.Environmental conditions:
 
Operating Temperature: -5℃ to 45℃, derating above 45℃
Storage temperature: -40℃ to 70℃
Relative humidity: ≤ 95% RH, non-condensing
Altitude: ≤ 2000m (above 2000m derating)
Cooling: forced air-cooled
 
2. Input characteristics:
 
Input Voltage Range: 85Vac ~ 290Vac, single-phase three-wire
Rated input voltage: 200VAC ~ 250VAC
The power derating input voltage range: 85Vac ~ 176VA
Does not work to withstand the maximum the static voltage: 415VAC should be
Rated input current: <16A @ 2900W
Maximum input current: <19A @ 2900W/176Vac
Input inrush current: <30A
Allows you to enter the grid frequency: 45 ~ 65Hz
Rated input grid frequency: 50Hz/60Hz
 
3. Output characteristics:
 
Output DC voltage range: 50V
DC output current: 0A to 60.5A
Regulation accuracy ≤ ± 0.5%
Load regulation rate ≤ ± 0.5%
Voltage regulation rate ≤ ± 0.1%
Boot on the red magnitude ≤ ± 1%
 
4 module Dimensions:
 
124.3mm (H) x 84mm (W) x 287mm (D)
 
5:Weight: ≤ 3.5kg

This product was added to our catalog on Monday 30 December, 2019.

Paypal_WU
Your IP Address is: 35.171.159.141
Copyright © 2024 Official Warner RF Online Store.